HOME > Products > Metalworking Machinery > MW0700-038 Metal Working Equipment

MW0700-038 Metal Working Equipment
Specifications:
MODEL : MW0700-038
40NC
60NC
80NC
Nominal Size
Swing Over Bed
400mm (17-5/16in)
Swing Over Cross Slide
190mm (7-1/2in)
Hight Of Center
220mm (8-5/8in)
Distance Between Center
1000mm (40in)
1500mm (60in)
2000mm (80in)
Bed
Width Of Bedways
330mm (13in)
Total Length Of Bed
2000mm (78in)
2510mm (98in)
3020mm (118in)
Swing Over Gap
660mm (26in)
Length Of Gap
300mm (11-3/4in)
Width In Front Of Face Plate
190mm (7-1/2in)
Spindle
Spindle Nose Mounting
D1-8 CAMLOCK
Spindle Bore
86mm (3-3/8in)
Taper Of Spindle Bore
M.T. #7 (Sleeve M.T. #5)
Range Of Spindle Speeds
High 2000-240/ Middle 380-45/ Low 84-10RPM
Slide

Cross Slide Travel (X Axis) (Ball Screw 25mm x 5mm C5)

280mm (11in)
Rapid Travel (X Axis)
6 m/min
X Axis Driver Motor
29 Lb/in (Centroid) 7.3Nm AC servo (Fagor)
Longitudinal Travel ( Z Axis) (Ball Screw 40mm x 10mm C5)
920mm (36-1/4in)
1430mm (56-1/ 4in)
1940mm (76-3/8in)
Rapid Travel (Z Axis)
8 m/min
Z Axis Driver Motor
29 Lb/in (Centroid) 7.3Nm AC servo (Fagor)
40 Lb/in (Centroid) 9.3Nm AC servo (Fagor)
Tooling
Max. Size culting tool
25mm (1") (for quick change tool post)
Hydraulic Turret (optional)
8 Tool Section (25mm for square tool, 40mm dia. for boring tool)
Electrical Turret (optional)
6 Tool Section (20mm for square tool, 7/8in for boring tool)
Tail
Tailstock Quill Diameter
75mm (3in)
Tailstock Quill Taper
M.T. #5
Tailstock Quill Travel
160mm (6-5/16in)
Motor
Main Spindle Motor
10HP 7.5KW
Weight
Machine Weight
1800Kgs
2000Kgs
2300Kgs

Description:
*Swing Over Bed: 400mm(17-5/16")
*Distance Between Center: 1000mm(40"), 1500mm(60"), 2000mm(80")
*Swing Over Gap: 660mm(26")
*Taper of Spindle Bore: M.T. #7 (Sleeve M.T. #5