HOME > Products > Metalworking Machinery > MW0900-004 Metal Working Equipment

MW0900-004 Metal Working Equipment
Specifications:
FOR CUTTING:
*Normal Size:
-Swing over bed: 180mm (7")
-Swing over cross slide: 100mm (4")
-Distance between center: 350mm (13-3/4")
*Bed:
-Width of the bed surface: 83mm (3-2/8")
-Total length of the bed: 670mm (26")
*Spindle:
-Spindle bore: 20mm (13/16")
-3-jaw chuck spindle bore: 16mm (5/8")
-Number of spindle speeds: variable speed
-Range of spindle speeds: 300~2900 RPM
-Dividing degree min 2°
-Spindle motor: 500W
*Thread:
-Lead screw: 16mm (5/8") Dia. x 16 T.P.I. or 1.5mm pitch
-Inch threads: 12-52 T.P.I.
-Metric threads: 0.25-1.5mm pitch
*Tool Slide:
-Cross slide travel: 75mm (3")
Compound rest travel: 50mm (2")
-Max. size cutting tool: 12mmx12mm (1/2")
*Tail stock:
-Spindle travel: 42mm (1-21/32")
-Taper of center: M.T. No.2


FOR MILLING:
-Longitudinal(X) axis: 12" (300mm)
-Vertical(Z) axis: 8" (215mm)
-Max. output: 500W (DC motor)
-Spindle speed: 300~2900 RPM
-Spindle taper: MT3
-T slot: 1/2" (12mm)
-Spindle nose to table: 12" (300mm)
-Spindle rotary angle: +45°~-45°
-Drilling capacity: 1/2" (13mm) Max.
-End milling capacity: 1/2" (13mm) Max.
-Face milling capacity: 3/4" (20mm) Max.
-Machine Dimensions: 810x470x560 mm
*Standard Accessories of Milling Machine:
1. Trox wrench
2. 13mm drill chuck
3. Oiler
4. Fixing pin
5. L hex. Wrench
6. Draw bar
7. Open end wrench
8. Drill chuck holder
9. Handle
*Standard Accessories of Lathe Machine:
1. Change gear sets
2. Hexagon wrench
3. 3-jaws
4. Handle
5. 3-jaws wrench
6. Spanner

*Packing:
1set/ctn/13.3', 55/71Kgs
Carton Size: 940Lx770Wx520H mm

Character:

*Optional Accessories of Milling Machine:
1. 20mm Face Mill
2. 8mm End Mill
3. Collect Chuck Set for Mill(Metric)
4. Collect Chuck Set for Mill(SAE)
5. LS Install(X,Y,Z)
6. LS Install(X,Y)

*Optional Accessories of Lathe Machine:
1. 4 Jaw Independent Chuck
2. MT2 10mm Drill Chuck
3. Rolling Center #2
4. Standard Type Tungesten Steel Lathe Tool

Description:
*Compound Type for Cutting and Milling